B-pillar TPE Door Sill Protection Pad for Tesla Model 3 Highland 2024+

B-Pillar TPE Door Sill Protection Pads for Tesla Model 3 Highland 2024+

Protect the high-contact B-pillar and door-entry area of your Tesla Model 3 Highland from everyday shoe marks, scratches and scuffs. Made from flexible TPE and shaped to follow the factory contours for a clean, low-profile appearance.

Protects a High-Contact Entry Area

B-Pillar / Door Entry Area
The pads are designed for the center B-pillar and adjacent entry surface that frequently comes into contact with shoes and legs during entry and exit.

Daily Wear Protection
The TPE surface adds a sacrificial protective layer over the original interior trim.

Low-Profile Appearance
The slim molded shape is designed to blend into the cabin without adding excessive bulk.

TPE Material

Everyday Interior Protection

Shoe Marks
Helps shield the original trim from repeated contact during entry and exit.

Minor Scratches & Scuffs
Adds a protective surface over the covered area for common daily abrasion.

Mud & Dirt
The wipe-clean TPE surface makes it easier to clean off everyday road dirt and muddy footwear marks.

⚠️ Surface Protection Only

These pads are intended to help protect the covered trim from everyday cosmetic wear. They are not structural impact protectors and cannot prevent dents, cracks or major damage from heavy impacts.

Vehicle Compatibility

⚠️ Model 3 Highland Only

This product is shaped for the refreshed Model 3 Highland B-pillar and door-entry area. Compatibility with Model 3 2017–2023, Model Y, Model Y Juniper or Model YL is not stated on this exact product page.

3M Adhesive Installation

1. Clean the Surface
Remove dust, mud, oil, wax and interior detailing residue from the installation area.

2. Dry Completely
Make sure the surface is completely dry before applying the adhesive.

3. Dry-Fit the Pad
Place the protector against the B-pillar area and confirm the edges and contours before removing the adhesive liner.

4. Remove the Adhesive Backing
Peel away the 3M adhesive liner without touching the adhesive more than necessary.

5. Press Firmly Into Position
Apply even pressure across the entire protector, especially around the edges.

6. Recheck the Edges
Confirm that all edges remain fully seated after installation.

No Drilling or Permanent Modification

Installation uses automotive-grade 3M adhesive backing. No screws, drilling, cutting or trim disassembly are required.

⚠️ Surface Preparation Affects Adhesion

Adhesive performance can be reduced by dust, silicone-based interior dressings, wax, moisture or very low installation temperatures. Clean and dry the mounting surface thoroughly before installation.

Removal

The supplier states that the 3M adhesive can be removed without damaging the original surface when removed correctly.

If removal is required, gently warm the adhesive area and peel the protector away slowly rather than pulling it off abruptly.

⚠️ Adhesive Residue Can Vary

Although the supplier states that proper removal will not damage the original surface, adhesive behavior can vary with installation time, heat exposure, surface condition and cleaning products. Remove slowly and carefully.

Easy Cleaning

For dust and light dirt, wipe the TPE surface with a soft damp microfiber cloth.

For muddy shoe marks, use water and a mild interior-safe cleaner if needed.

Avoid harsh solvents or abrasive brushes that could damage the surface finish.

Specifications

⚠️ Exact Dimensions & Piece Count Are Not Published

The current supplier page does not publish exact dimensions, thickness, TPE hardness, weight or a confirmed package piece count. Do not add those specifications unless they are separately verified for this exact product.

Package

Includes the B-pillar / door-entry TPE protection pad set supplied for this listing. The current page does not clearly publish the exact number of individual pieces.

Quick Answers