Door Open Button Stickers for Model Y Juniper & Model 3 Highland

Door Open Button Stickers for Tesla Model Y Juniper / Model 3 Highland

Add a subtle color accent around the interior door-open buttons while helping protect the frequently touched button area from light marks and everyday wear. Made with a soft suede-style surface and precision-cut adhesive backing for refreshed Tesla interiors.

Small Interior Detail, Noticeable Visual Change

Add Color Around the Door Controls
The stickers frame the factory door-open button area with a contrasting suede-style accent.

Helps Protect a High-Touch Area
Adds a sacrificial surface around an area that is frequently touched by drivers and passengers.

Easy to Change Later
The adhesive system is designed for repositionable alignment during installation and later removal when desired.

Suede-Style Decorative Surface

The supplier describes the surface material as ecological suede with anti-stain treatment. It is intended to provide a soft-touch interior finish while remaining practical for a frequently used control area.

The exact fiber composition is not published on the current page.

Material Composition Note

The supplier uses the term “ecological suede.” This listing does not describe the material as genuine animal suede or genuine Alcantara because the exact fiber composition is not published.

Stain-Resistant Surface Treatment

The supplier states that the suede surface uses a nano-coating designed to resist water and oily stains, making everyday marks easier to wipe away.

⚠️ Stain-Resistant Does Not Mean Waterproof

The coated surface can help resist light moisture and stains, but this decorative sticker should not be treated as waterproof or liquid-sealed. Wipe spills promptly and avoid saturating the material.

Vehicle Compatibility

⚠️ Not Compatible With Model 3 Standard or Model Y Standard

The supplier specifically excludes Tesla Model 3 Standard and Model Y Standard from this product. Confirm your vehicle version before ordering rather than relying only on the Model 3 / Model Y name.

Do Not Assume Earlier Model 3 / Model Y Fitment

This exact listing is designed around the refreshed Model 3 Highland and Model Y Juniper door-open button layout. Earlier interior generations are not listed as compatible on the exact product page.

Current Color Options

3M Air-Guide Adhesive Backing

The supplier specifies imported 3M air-guide groove material on the adhesive layer. The channel structure is designed to help air escape during installation and reduce trapped bubbles.

3M microbead positioning technology is also used to allow small alignment adjustments before final pressure is applied.

Adhesive Removal Note

The supplier makes a strong long-term residue-free claim for the adhesive material. Actual residue can still vary with temperature, installation duration, cleaning products, surface condition and removal technique. For a safer product claim, describe the adhesive as designed for cleaner removal rather than guaranteeing zero residue for a fixed number of years.

Installation Guide

1. Clean the Button Area
Remove dust, skin oils and interior dressing residue from around the factory door-open button.

2. Dry Completely
Make sure the installation surface is clean and dry.

3. Test the Position
Compare the sticker shape with the door-open button area before removing the adhesive backing.

4. Peel the Backing
Carefully expose the adhesive surface.

5. Align the Sticker
Position the sticker around the factory button. The microbead adhesive system allows limited repositioning before final pressure.

6. Press to Secure
Once correctly aligned, press evenly over the entire sticker to establish adhesion.

⚠️ Do Not Obstruct Door Button Operation

After installation, press every affected door-open button several times and confirm normal operation. The sticker must not overlap the moving button surface or make the button difficult to press.

Keep Factory Emergency Door-Release Knowledge Unchanged

This product is only a decorative sticker around the electronic door-open control. It does not replace or modify the vehicle's electronic button or emergency manual door-release system. Owners and passengers should still follow Tesla's vehicle instructions for normal and emergency door operation.

Cleaning & Care

Routine Dust
Use a soft microfiber cloth or soft brush to remove loose dust.

Light Stains
Blot or gently wipe the coated surface with a slightly damp cloth.

Avoid Harsh Chemicals
Do not use bleach, strong solvents or aggressive interior cleaners.

Avoid Excessive Rubbing
Frequent hard scrubbing can alter the suede texture and edges of the sticker.

Specifications

⚠️ Unpublished Specifications

The current exact product page does not publish sticker dimensions, material thickness, fiber composition, coating chemistry, adhesive thickness, temperature range or independent abrasion / stain-test data. Do not add these values unless separately confirmed for this exact product.

Package Includes

4 × Door Open Button Stickers in the selected color

Quick Answers