Dry Carbon Fiber Steering Wheel Trim Cover Kit for Model Y Juniper Premium / Model Y Standard / Model YL

Dry Carbon Fiber Steering Wheel Trim Cover Kit for Tesla Model Y Juniper / Model Y Standard / Model YL

Upgrade your Tesla steering wheel with a coordinated five-piece dry carbon fiber trim kit. Featuring matching covers for both steering wheel button panels, the lower V-shaped spoke, and the upper and lower rim, this set adds a refined motorsport-inspired finish while preserving the original steering wheel and controls.

A Coordinated Carbon Fiber Steering Wheel

The steering wheel is one of the most visible and frequently touched areas of your Tesla interior. This five-piece kit extends the carbon fiber styling beyond the button panels to the lower spoke and upper and lower rim, creating a more consistent, performance-inspired appearance.

The genuine dry carbon fiber texture adds visual depth, while the matte finish complements the original interior trim without an overly reflective look.

This is a trim cover kit, not a replacement steering wheel. The original steering wheel, button assemblies, and other factory components remain in place.

Vehicle Compatibility

Designed for the following compatible steering wheel configurations:

• Tesla Model Y Juniper Premium 2025+
• Tesla Model Y Standard 2025+
• Tesla Model YL 2026+

This kit is shaped for the listed steering wheel layouts. Confirm your vehicle version, button panel contours, lower V-shaped spoke, and rim shape before ordering.

If your steering wheel has been replaced or modified, contact the seller with clear photos to confirm fitment before purchase.

Five Pieces for a Unified Finish

Left Button Panel Cover — 1 Piece
Adds a matching carbon fiber finish around the left steering wheel control panel.

Right Button Panel Cover — 1 Piece
Complements the opposite control panel for a balanced appearance.

Lower V-Shaped Spoke Cover — 1 Piece
Extends the carbon fiber styling to the lower central spoke.

Upper Steering Wheel Rim Cover — 1 Piece
Adds a matching accent along the upper rim.

Lower Steering Wheel Rim Cover — 1 Piece
Completes the styling along the lower rim for a coordinated finish.

The five pieces are designed to work together as a complete set. The original steering wheel and its controls are not included.

Thoughtful Mounting Design

Adhesive-Mounted Panel Covers
The left and right button-panel covers and lower V-shaped spoke cover use pre-applied 3M automotive adhesive.

Clip-On Rim Covers
The upper and lower rim covers use clip-on connections with internal anti-slip foam to help maintain a secure fit.

Original Controls Retained
The covers are designed to fit around the compatible factory controls without replacing the original buttons or scroll wheels.

Correct alignment is essential. All buttons, scroll wheels, and other steering wheel controls must remain fully accessible after installation.

⚠️ Compatibility & Safety Notice

This product is a decorative steering wheel trim kit, not a replacement steering wheel, airbag cover, or steering control assembly.

Before installation, check that each piece matches the original steering wheel contours. Do not install a cover if it obstructs buttons, scroll wheels, the horn area, or the driver's grip.

The rim covers use clip-on fittings. Make sure both pieces are fully seated and secure before driving. If the steering wheel has aftermarket accessories or a different rim shape, confirm compatibility before ordering.

Installation

1. Prepare the Steering Wheel
Clean the mounting surfaces with a suitable cleaner and a soft cloth. Make sure all contact areas are completely dry.

2. Test-Fit All Five Pieces
Position the three panel covers and two rim covers without removing the adhesive liners. Confirm the correct orientation and alignment.

3. Install the Button Panel Covers
Peel the protective liner from the pre-applied 3M adhesive, align each cover carefully, and press firmly into place.

4. Install the Lower V-Shaped Cover
Align the cover with the lower spoke contours and press evenly along the adhesive contact areas.

5. Fit the Upper and Lower Rim Covers
Position each rim cover over its matching section and engage the clip-on connections. Keep the internal anti-slip foam in place.

6. Check All Edges and Clips
Confirm that the adhesive-mounted panels sit evenly and both rim covers are securely attached.

7. Test Steering Wheel Controls
Operate all buttons and scroll wheels and verify that the horn area and normal hand positions remain unobstructed before driving.

⚠️ Installation & Care Tips

Test-fit every piece before removing the adhesive liners. Repositioning adhesive-mounted covers repeatedly may reduce their bonding strength.

Do not force the rim covers into place or remove the internal anti-slip foam. If a cover does not align with the original rim, stop and confirm compatibility.

Clean the matte carbon fiber surface with a soft microfiber cloth, using a slightly damp cloth if necessary. Avoid abrasive pads, harsh chemicals, and excessive pressure.

Specifications

FAQ