Model Y Juniper Premium & YL Body Kit – Front Lip, Side Skirts & Rear Diffuser

PP Body Kit for Tesla Model Y Juniper Premium & Model YL

Create a more coordinated front-to-rear appearance with a vehicle-specific body kit combining a sculpted front lip, side skirts and rear diffuser, with an optional rear spoiler for a more complete exterior upgrade.

Choose Your Kit

Component Construction

Vehicle Compatibility

⚠️ Juniper Premium & Model YL Kits Are Not Interchangeable

Model Y Juniper Premium and Model YL use different body dimensions. Select the kit made specifically for your vehicle. Do not install a Juniper kit on Model YL or a Model YL kit on Juniper.

⚠️ Juniper Standard & Performance Are Not Compatible

Tesery currently specifies this Juniper version for Model Y Juniper Premium produced from March 2025 onward. The supplier states that Juniper Standard and Juniper Performance are not compatible with this kit.

⚠️ Check Production Date — Not Model Year Alone

For Model Y Juniper Premium, Tesery bases compatibility on the vehicle trim and production date. The current fitment requirement is March 2025 production onward.

Finish Options

Installation Method

Automotive Adhesive Tape
The front lip, side skirts and rear diffuser use component-specific adhesive tape to help position and secure the parts.

Factory Mounting Areas
The base kit also uses the vehicle's existing plastic mounting areas together with supplied mechanical fasteners.

No Original Exterior Parts Need to Be Removed
Tesery states that the kit installs over the compatible factory body surfaces without removing the original bumper, side trim or rear fascia components.

⚠️ Base Kit Is Not Adhesive-Only

The front lip, side skirts and rear diffuser use self-tapping screws in addition to adhesive tape. Tesery states that these screws enter the vehicle's original plastic panels and leave holes at the fastening locations. This is not a completely reversible adhesive-only installation.

Optional Rear Spoiler

The rear spoiler is available as part of the 5-piece kit and is not included in the base 4-piece kit.

Tesery specifies a three-section blow-molded PP construction for the spoiler.

Unlike the lower body components, the spoiler uses adhesive installation only and does not require drilling.

⚠️ Front Lip May Reduce Ground Clearance

The front lip extends below the original front bumper edge and may reduce available ground clearance. Use additional care around parking curbs, wheel stops, steep driveways and ramps. Tesery does not publish an exact clearance reduction.

Installation Overview

1. Clean & Prepare the Surfaces
Remove dirt, wax, oil and detailing products from all bonding and mounting areas and allow the surfaces to dry completely.

2. Dry-Fit Every Section
Position the front lip, skirts and rear diffuser before removing adhesive liners or installing screws.

3. Confirm Alignment
Check all panel gaps, section joints and body contours before permanently securing the parts.

4. Apply the Adhesive
Remove the adhesive backing and press the components firmly against the compatible mounting surfaces.

5. Install the Supplied Fasteners
Secure the base-kit components using the specified mounting locations and included screws.

6. Allow Adhesive to Cure
Follow the supplied adhesive instructions and avoid washing or disturbing the installed parts until the bond has properly cured.

⚠️ Professional Installation Recommended

Because the lower body kit requires alignment across multiple sections and uses both adhesive and mechanical fasteners, professional installation is recommended if you are not experienced with exterior body accessories.

Specifications

Package Configuration

4PCS Kit:
Front Lip Assembly
Left Side Skirt
Right Side Skirt
Rear Diffuser Assembly
Component-Specific Adhesive Tape
Required Mounting Hardware

5PCS Kit:
Everything in the 4PCS kit above
+ Rear Spoiler

Oversized Body Kit

This is a large multi-piece exterior body kit. Actual delivery method and transit time can differ from standard small accessories.

Quick Answers