Rear Led Spoiler for Model 3 Highland / Model Y

Land Ghost Rear LED Spoiler for Tesla Model 3 / Model Y

Give your Tesla a more distinctive rear profile with an ABS trunk spoiler featuring an integrated LED brake light. The Land Ghost design combines exterior styling with an illuminated brake-light function and installs using adhesive bonding plus an electrical wiring connection.

Exterior Styling with an Integrated Lighting Function

Distinctive Rear Profile
The Land Ghost spoiler changes the visual shape of the trunk edge for a sportier exterior appearance.

Integrated Brake Illumination
The built-in LED section is designed to illuminate in coordination with the vehicle's brake-light system once the wiring is connected correctly.

One Integrated Assembly
The LED lighting element is incorporated into the spoiler rather than installed as a separate loose light strip.

Integrated LED Brake-Light Function

The supplier describes the spoiler as having an integrated LED brake light. The lighting requires connection to the appropriate existing brake-light circuit and should be tested before finalizing installation.

Brake-Light Accessory — Not a Safety-System Upgrade

The integrated LED provides an additional illuminated element when connected correctly. This aftermarket spoiler should not be described as guaranteeing improved braking safety, shorter stopping distance or compliance with every local lighting regulation.

Premium ABS Construction

Not a Carbon Fiber Spoiler

The current exact product specification identifies the spoiler body as ABS plastic. Do not describe this product as real carbon fiber, dry carbon fiber or forged carbon unless a separate exact variant is documented.

Exterior-Use Construction

The supplier describes the ABS spoiler as UV-stable and weather-resistant for normal exterior vehicle use. Regular inspection of the adhesive bond and LED function is recommended, particularly after severe weather.

Weather-Resistant Does Not Mean Damage-Proof

No IP rating, UV-test duration or independent environmental certification is published for the complete spoiler assembly. Avoid describing the product as waterproof, fade-proof or permanently weatherproof.

Current English-Page Vehicle Options

⚠️ Model Y Fitment Must Be Confirmed Before Ordering

Tesery's current regional storefronts show conflicting Model Y options for this exact product. The English page lists Model Y 2020–2025.03, while some localized Tesery pages display Model Y Juniper 2025+. Confirm the actual spoiler shape, wiring harness and selected SKU for your Model Y generation before ordering.

Choose the Correct Vehicle Version

Different Tesla trunk shapes and electrical layouts may require different spoiler versions. Do not assume that the Model 3, Model 3 Highland and Model Y versions are interchangeable.

Aerodynamic Performance Is Not Independently Published

The supplier markets the spoiler as an aerodynamic styling component, but the exact page does not publish CFD data, wind-tunnel results, drag-coefficient changes or tested downforce values. This listing therefore does not promise measurable range, drag or high-speed stability improvements.

Installation Overview

1. Clean the Trunk Surface
Clean the mounting area thoroughly with isopropyl alcohol and allow the surface to dry completely.

2. Test-Fit the Spoiler
Place the spoiler in position without removing the adhesive backing and confirm the shape, alignment and wiring route.

3. Plan the LED Wiring
Route the LED harness toward the appropriate existing brake-light connection point according to the supplied wiring instructions.

4. Remove the Adhesive Backing
Once alignment is confirmed, carefully expose the adhesive.

5. Position & Bond
Set the spoiler onto the trunk in the correct location and apply firm, even pressure.

6. Secure With Painter's Tape
The supplier recommends using painter's tape to hold the spoiler securely during the bonding period.

7. Connect & Test the LED
Complete the brake-light connection and verify correct LED operation before considering installation complete.

⚠️ Electrical Connection Is Required

This is not a purely cosmetic peel-and-stick spoiler. The integrated LED requires wiring to the appropriate vehicle brake-light circuit. If you are not comfortable identifying and connecting automotive lighting wiring, professional installation is recommended.

Verify Brake-Light Operation Before Driving

After installation, confirm that the original brake lights and the spoiler LED function normally and that no warning or electrical fault is present. Do not drive if installation causes abnormal brake-light behavior.

72-Hour Initial Adhesive Cure

Tesery recommends keeping the spoiler secured with painter's tape for approximately 72 hours after installation to support the initial adhesive bond. Avoid disturbing or repositioning the spoiler during this period.

⚠️ Avoid Car Washing During Initial Cure

Tesery advises avoiding car washes during the initial bonding period and recommends waiting approximately 7 days after installation before using an automatic car wash.

Inspect the Adhesive Bond Regularly

Because the spoiler is mounted to an exterior body panel using adhesive, inspect the bond periodically and after extreme temperatures, severe weather or high-pressure washing. Do not continue driving with a spoiler that is loose or lifting from the trunk.

⚠️ Check Local Exterior Lighting Regulations

Rules for supplemental brake lighting can vary by country, state or region. Confirm that the installed LED color, position and operating behavior comply with applicable vehicle-lighting regulations in your location.

Cleaning & Care

Routine Washing
Use pH-neutral automotive soap and a clean, soft microfiber cloth.

Avoid Abrasive Products
Do not use aggressive polishing compounds or abrasive pads on the spoiler or LED lens.

Inspect the LED
Periodically check that the integrated brake light operates consistently.

Inspect the Mounting Bond
Check the spoiler edges and adhesive attachment after extreme weather or prolonged exterior exposure.

Specifications

⚠️ Unpublished Specifications

The exact product page does not publish LED wattage, operating voltage, LED count, lumen output, waterproof IP rating, wiring pinout, fuse rating, spoiler dimensions, spoiler weight, ABS thickness, adhesive brand, tested downforce or drag-reduction data. Do not add these specifications unless separately confirmed for the exact selected variant.

Package Configuration

1 × Land Ghost Rear LED Spoiler for the Selected Vehicle Version

Quick Answers