Starlink Gen 3 PoE Injector | 200W 5-in-1 Power Adapter with USB-C

$91.79 USD $101.99 USD

Starlink Gen 3 PoE Injector | 200W 5-in-1 Power Adapter with USB-C

Name: Starlink Gen 3 PoE Injector | 200W 5-in-1 Power Adapter | TESKAY
Brand: Teskay
SKU: SPA002
Price: 91.79 USD
Availability: InStock

$91.79 USD $101.99 USD

Order now, estimated delivery: Calculating...

Free shipping on orders over $99
30-day free returns & exchanges

200W 5-in-1 DC PoE Injector for Starlink Gen 3 Standard

Build a cleaner DC-powered Starlink setup for RVs, vans, boats and off-grid installations with one compact unit that combines DC conversion, Starlink passive PoE power injection, Gigabit Ethernet and auxiliary USB power outputs.

DC 9–36V input · 57V/3A Starlink output · Gigabit LAN · USB-A + USB-C

200W 5-in-1 PoE injector DC power converter for Starlink Gen 3 Standard

⚡

Direct 9–36V DC Input

Accepts a wide DC input range suitable for many properly designed 12V and 24V battery-based installations, eliminating the need to convert DC to household AC first.

🛰️

57V Passive PoE for Gen 3

The dedicated SPX PoE output provides up to 57V / 3A for the compatible Starlink Standard Gen 3 terminal.

🌐

Gigabit LAN Connectivity

The integrated 10/100/1000Mbps LAN port provides a wired data handoff for a compatible router or network device.

Simplify a Mobile Starlink Power System

🚐

Built for DC-based mobile installations

Useful in RV, van, camper and other battery-powered systems where a suitable high-current DC supply is already available.

⛵

Suitable for properly designed marine setups

Wide-range DC input makes the converter useful for many boat and off-grid systems when installed in a dry, protected electrical location.

🔌

Five integrated interfaces

Combines DC input, Starlink SPX PoE, Gigabit LAN, USB-A and USB-C connections in one compact enclosure.

📱

Auxiliary USB power

USB-A provides up to 12V / 3A while the USB-C port is specified at up to 5V / 3A for compatible auxiliary devices.

🛡️

Surge & ESD protection

Current technical specifications list surge and electrostatic-discharge protection for additional electrical resilience.

200W Rating vs. Starlink PoE Output

The unit is currently marketed as a 200W converter and requires an input source capable of at least 200W. The detailed technical specification lists the Starlink SPX output itself as 57V / 3A Max, which corresponds to a maximum nominal PoE output of approximately 171W.

One Compact Hub for Power & Data

Ports and dimensions of Starlink Gen 3 200W PoE injector

SPX PoE Port

Dedicated Starlink Standard Gen 3 power/data connection, specified at up to 57V / 3A.

Gigabit LAN

10/100/1000Mbps Ethernet connection for compatible downstream networking equipment.

USB-A Output

Manufacturer-listed maximum output: 12V / 3A.

USB-C Output

Manufacturer-listed maximum output: 5V / 3A.

3-Pin DC Input

Positive, negative and ground terminals for a properly fused 9–36V DC power source.

Compact Size

Approx. 120 × 92 × 35 mm (4.72 × 3.62 × 1.37 in).

LAN USB-A and USB-C ports on Starlink Gen 3 DC PoE injector

The PoE Port Uses Starlink-Specific Passive Power

Current pin assignment is +V on pins 1, 2, 3 and 6, and -V on pins 4, 5, 7 and 8. Do not connect ordinary non-compatible Ethernet equipment directly to the powered SPX/PoE port.

Confirm the Starlink Terminal Before Installation

Starlink terminal compatibility chart for Gen 3 PoE injector

1. Verify Starlink Standard

This converter is currently specified for the Starlink Standard terminal commonly identified as Gen 3 / Standard with the kickstand-style dish.

2. Size the DC Supply Correctly

The current manufacturer requires a DC 9–36V source capable of supplying at least 200W. Cable gauge, fuse size and connection hardware must be appropriate for the actual system current.

3. Connect Positive, Negative & Ground

Connect the 3-pin input only after confirming supply polarity and proper circuit protection.

4. Connect the Gen 3 Dish

Connect the compatible Starlink Standard cable to the dedicated SPX PoE port.

5. Connect Your Network

Use the LAN port for a compatible router or Ethernet device. Verify the downstream router's separate power requirements before installation.

6. Test Before Permanent Mounting

Verify Starlink startup, network connectivity and stable DC operation before permanently securing the converter.

Starlink Gen 3 PoE injector RV installation diagram

Not Compatible with Every Starlink Terminal

Current compatibility imagery specifically excludes Standard Actuated, High Performance and Flat High Performance terminals. It should not be purchased simply because a dish is described generically as “Starlink.”

Do Not Assume a Cigarette-Lighter Socket Can Supply It

The manufacturer specifies a minimum 200W input supply. Many vehicle accessory sockets and their wiring are rated below the current required for a 200W DC load. Verify the source, fuse and wiring capacity before connecting this unit.

Specifications

Attribute	Details
Current Product Name	Starlink Gen 3 PoE Injector \| 200W 5-in-1 Power Adapter with USB-C
Old URL Slug	150W 2-in-1 PoE Injector DC Converter
Confirmed Starlink Compatibility	Starlink Standard Gen 3
Standard Actuated	Not Compatible
High Performance	Not Compatible
Flat High Performance	Not Compatible
DC Input	9–36V DC
Minimum Input Power	200W
Device Power Class	200W
Starlink SPX Output	57V / 3A Max
Nominal Max SPX Power	Approx. 171W at 57V × 3A
PoE Type	Starlink-Specific Passive PoE
Positive PoE Pins	1, 2, 3, 6
Negative PoE Pins	4, 5, 7, 8
LAN Port	1 × RJ45 Ethernet
Network Speed	10 / 100 / 1000Mbps
USB-A Output	12V / 3A Max
USB-C Output	5V / 3A Max
Simultaneous Maximum Output Allocation	Not Fully Published
Input Terminal	3-Pin Positive / Negative / Ground
Dimensions	Approx. 120 × 92 × 35 mm
Operating Temperature	-20°C to +55°C
Storage Temperature	-40°C to +70°C
Operating Humidity	10%–90%, Non-Condensing
Surge Protection	±8kV Differential, Class A
ESD Protection	±8kV Contact / ±15kV Air, Class A
Published IP Rating	Not Published
Exact Housing Material	Not Published

Quick Answers

Is this still the old 150W 2-in-1 product? +

No. The URL still contains the old 150W 2-in-1 slug, but the current live product has been replaced by a 200W 5-in-1 Starlink Gen 3 PoE injector.

Does it provide 200W directly to the Starlink dish? +

The complete converter is rated as a 200W-class unit, but the detailed Starlink SPX output specification is 57V / 3A Max, or approximately 171W nominal maximum.

Which Starlink terminal does it fit? +

Current compatibility is specifically listed for Starlink Standard Gen 3.

Does it fit Starlink High Performance? +

No. High Performance and Flat High Performance terminals are specifically shown as incompatible.

Does it fit Standard Actuated? +

No. Current manufacturer compatibility imagery specifically excludes Standard Actuated.

Can I power it from a 12V battery? +

12V falls within the published 9–36V input range, but the power source, wiring and fuse must be capable of supporting the manufacturer's minimum 200W input requirement.

Can I power it from a 24V battery system? +

Yes, 24V is within the published 9–36V input range when connected through a properly sized and protected DC circuit.

Can I plug it into a normal car cigarette-lighter socket? +

Do not assume so. The unit requires a DC supply capable of at least 200W, which may exceed the rating of many vehicle accessory sockets and their wiring.

Does it have Gigabit Ethernet? +

Yes. The LAN interface is specified at 10/100/1000Mbps.

Can the USB-A and USB-C ports charge other devices? +

Yes. Current ratings are up to 12V / 3A for USB-A and 5V / 3A for USB-C. Compatibility still depends on the connected device's charging requirements.

Can every output deliver its maximum rating at the same time? +

The current source publishes individual maximum port ratings but does not provide a complete simultaneous-output power allocation table. This page therefore does not guarantee every port can sustain its individual maximum at the same time.

Can I connect a normal computer directly to the powered PoE port? +

No. The powered SPX port uses a Starlink-specific passive 57V pin configuration. Use the separate LAN port for normal compatible Ethernet networking equipment.

Does this automatically include a Wi-Fi router? +

No Wi-Fi router is identified as part of the current injector itself. The integrated LAN port provides Ethernet connectivity; any separate router must be compatible and powered appropriately.

Does it have electrical protection? +

Current specifications list ±8kV differential surge protection plus ±8kV contact and ±15kV air ESD protection.

Is the converter waterproof? +

No verified IP waterproof rating is currently published. Install the converter in a dry, ventilated and protected electrical location rather than exposing it directly to water.

How large is the unit? +

Current product imagery lists approximately 120 × 92 × 35 mm (4.72 × 3.62 × 1.37 inches).

You can contact Teskay directly via the chat bubble in the bottom-right corner.
You can also reach our customer support team by emailing kay@teskay.com.

We will respond to your message within 24 hours.

Yes, absolutely. Paying on Teskay is safe and secure.

We use Shopify Payments, Shopify’s official payment system, to help ensure that every transaction is protected throughout the checkout process.

Bank-level security

Your payment information is encrypted and processed securely. We do not see or store your full card details.

Fraud protection

Shopify Payments uses advanced fraud detection and risk analysis tools to help prevent unauthorized transactions.

3D Secure verification

For some transactions, your bank may require additional verification to confirm that only the authorized cardholder can complete the payment.

Encrypted checkout

All payment data is protected with industry-standard encryption during the entire checkout process.

Trusted payment networks

Payments are processed through trusted global card networks such as Visa, Mastercard, and American Express.

In short, your payment on Teskay is handled through a secure and trusted payment infrastructure used by millions of customers worldwide, so you can shop with confidence.

📦 Processing Time

Orders are usually processed within 48 business hours after payment confirmation.

Please note that processing times may be slightly longer during weekends, holidays, or peak periods.

Some Tesla-related tools or accessories may include labels or stickers inside the package for identification or packaging purposes.

🚚 Shipping & Delivery

We offer free worldwide shipping on orders over $99 USD.

Please note that certain remote areas, such as islands or locations with limited carrier access (including Puerto Rico), may require an additional shipping fee. If this applies to your order, our customer service team will contact you before shipment.

Estimated delivery time for most standard orders: 7–13 business days (excluding order processing time).

For custom-made items, such as wheels or steering wheels, shipping times may vary. The estimated shipping time will be confirmed separately by our customer service team.

📌 Important Notes

Please make sure your shipping address and phone number are accurate and complete at checkout.

Teskay is not responsible for delivery issues caused by incorrect or incomplete shipping information provided by the customer.

Additional charges may apply for remote or hard-to-reach areas.

💬 Need Help?

If you have any questions about shipping or delivery, please feel free to contact our customer support team at kay@teskay.com. We are always happy to help.

Thank you for choosing Teskay ❤️

At Teskay LLC, we want you to enjoy a worry-free shopping experience. If you are not satisfied with your purchase, we are here to help.

🔄 30-Day Return Policy

You may request a return within 30 days of receiving your order.

Please contact us within this period to start the return process.

📦 Return Reasons & Fees

Defective, Damaged, or Incorrect Items

If the item you received is defective, damaged, or incorrect, we can offer you a full refund or a replacement.

All related costs will be covered by Teskay.
Non-Quality Returns

For returns due to personal reasons, such as change of mind, style preference, color preference, or ordering the wrong item, a 20% restocking fee will apply.

Return shipping costs are the responsibility of the customer.

📝 How to Start a Return

Please contact us at kay@teskay.com or through our live chat first.

Once your return request is approved, we will provide you with the return instructions.

Please do not send the item back without prior authorization, as unauthorized returns will not be accepted.

🚫 Non-Returnable Items

The following items cannot be returned unless there is a quality issue:

Customized products, such as steering wheels and rims

Gift cards

Hazardous materials or flammable items

If you are unsure whether your item is eligible for return, please contact us before making a purchase.

💰 Refunds & Exchanges

Once we receive and inspect your returned item, approved refunds will be issued to your original payment method within 1–3 business days.

Please note that the time it takes for the refund to appear in your account may vary depending on your bank or card issuer.

If you would like to exchange an item, we recommend returning the original item first and then placing a new order.

💬 Need Help?

Your satisfaction is important to us. If you have any questions, please feel free to contact us at kay@teskay.com. We are always happy to help.

Thank you for choosing Teskay ❤️