Starlink Gen 3 Router Mount | All-in-One Metal Wall Mount Kit

Black

$26.51 USD $32.64 USD

Starlink Gen 3 Router Mount | All-in-One Metal Wall Mount Kit

Name: Starlink Gen 3 Router Mount | All-in-One Metal Wall Mount Kit | TESKAY
Brand: Teskay
SKU: ACC-IC-0136-0001
Price: 26.51 USD
Availability: InStock

$26.51 USD $32.64 USD

Order now, estimated delivery: Calculating...

Free shipping on orders over $99
30-day free returns & exchanges

All-in-One Metal Wall Mount for Starlink Gen 3 Router & Power Supply

Organize your Starlink Gen 3 network hardware in one clean wall-mounted location. This one-piece metal bracket securely holds the Gen 3 router and V3 power adapter together while keeping cables accessible and freeing up valuable desk, shelf or floor space.

Starlink Gen 3 · 2-in-1 metal organizer · Black / White

All-in-one metal wall mount for Starlink Gen 3 router and power supply

📡

Router + Power Supply in One Mount

The dedicated 2-in-1 structure organizes both the Starlink Gen 3 router and V3 power adapter within one compact wall footprint.

🔩

2mm Iron-Alloy Construction

A rigid approximately 2 mm thick metal structure provides a stable mounting platform, finished with a corrosion-resistant surface coating.

↔️

Slide-In, Cable-Friendly Design

Open sides allow the Starlink components to slide into position while leaving their connection points accessible for cleaner cable routing.

A Cleaner Way to Organize Starlink Gen 3 Hardware

🧹

Clears desks, shelves and floors

Move both major Gen 3 indoor hardware components off furniture and keep the installation concentrated on a wall.

2️⃣

One bracket instead of two separate mounts

The router and power adapter share one integrated metal frame for a more compact and coordinated installation.

🔌

Ports remain accessible

The open structure avoids enclosing the equipment and leaves space around the connection areas for normal cable access.

🌬️

Open-frame ventilation

Unlike a closed enclosure, the bracket leaves the router and power adapter exposed to surrounding airflow.

🧩

Anti-slip contact pads included

Eight supplied pads can be positioned at contact points to help reduce direct metal-to-device contact and unwanted movement.

Mount Only — Starlink Hardware Not Included

The package contains the metal wall mount and installation hardware. The Starlink Gen 3 router, power supply / V3 Power Ethernet Adapter, Starlink dish and network cables are not included.

One-Piece Metal Construction

Iron alloy construction and corrosion-resistant coating of Starlink Gen 3 router mount

Iron-Alloy Body

The bracket is formed from a rigid ferrous metal / iron-alloy sheet rather than lightweight molded ABS.

Corrosion-Resistant Finish

The coated metal surface is designed to resist normal oxidation and everyday wear.

Black or White

Choose a black or white finish to better coordinate with the wall, Starlink equipment or surrounding room.

Side Slide-In Access

Components load from the side, making installation and later removal easier after cables are disconnected.

Dimensions and included hardware for Starlink Gen 3 all-in-one metal wall mount

Published Mount Dimensions

Approx. 5.12 in / 13 cm high, 3.15 in / 8 cm front-to-back depth, 6.7 in / 17 cm front support span, with approximately 0.07 in / 2 mm metal thickness.

Screw-In Wall Installation

1. Choose a Suitable Wall

Select a stable mounting surface with enough clearance for the router, power adapter and cable bends.

2. Position & Mark the Holes

Hold the bracket flat and level against the wall, then mark the mounting-hole locations before drilling.

3. Drill the Mounting Holes

Drill accurately at the marked locations using a bit appropriate for the wall material.

4. Install Anchors & Screws

Insert suitable expansion anchors and secure the metal bracket firmly with the supplied screws or wall-appropriate hardware.

5. Add the Anti-Slip Pads

Apply the supplied pads at appropriate equipment contact points before placing the Starlink components into the frame.

6. Slide in the Starlink Hardware

Slide the Gen 3 router and power adapter into their dedicated sections from the side.

Installation steps for Starlink Gen 3 router and power supply metal wall mount

Drilling Is Required

This is a screw-mounted metal wall bracket, not an adhesive mount. Always choose anchors and fasteners appropriate for the actual wall material and installation load.

Keep Starlink Electronics Within Their Approved Environment

The coated metal bracket is designed to resist normal corrosion, but router and power-supply placement should still follow the environmental and ventilation requirements specified for the Starlink electronics themselves.

Specifications

Attribute	Details
Product	All-in-One Metal Router & Power Supply Wall Mount
Compatibility	Starlink Gen 3 Router + V3 Power Ethernet Adapter / Power Supply
Starlink Dish Mount	No — Indoor Router / Power Hardware Organizer
Mount Type	2-in-1 One-Piece Wall Mount
Material	Iron Alloy / Ferrous Metal
Finish	Corrosion-Resistant / Anti-Rust Coating
Color Options	Black / White
Approx. Mount Height	13 cm / 5.12 in
Approx. Base Depth	8 cm / 3.15 in
Approx. Front Support Span	17 cm / 6.7 in
Metal Thickness	Approx. 2 mm / 0.07 in
Component Loading	Side Slide-In Design
Cable Access	Open / Accessible
Ventilation	Open-Frame Construction
Wall Installation	Screw-In Mounting
Drilling	Required
Router Included	No
Power Supply Included	No
Starlink Dish Included	No
Published Product Weight	Not Published
Published IP Rating	Not Published
Package Contents	1 × Metal Mount + 6 × Expansion Tubes + 6 × Expansion Screws + 8 × Anti-Slip Pads

Quick Answers

What Starlink hardware does this mount fit? +

It is custom-shaped for the Starlink Gen 3 router and the corresponding V3 Power Ethernet Adapter / power supply.

Is the Starlink Gen 3 router included? +

No. The router shown in the product images is for installation reference only.

Is the Starlink power supply included? +

No. The package contains the metal bracket and installation hardware only.

Is this a Starlink dish wall mount? +

No. It is designed for the Gen 3 indoor router and power hardware, not for mounting the Starlink antenna / dish.

Does it fit Starlink Gen 2 or Starlink Mini? +

No. The bracket geometry is specifically designed around the Starlink Gen 3 router and its matching power hardware.

Does installation require drilling? +

Yes. The supplied installation method uses drilled wall holes, expansion anchors and screws.

What wall can I install it on? +

Use a structurally suitable wall and anchors appropriate for the actual substrate. Concrete, masonry, drywall and timber may require different drilling and anchoring methods.

Can I install it outdoors? +

The metal mount has a corrosion-resistant finish, but the Starlink router and power equipment must still be installed within the environmental limits specified for those electronics. Indoor or appropriately sheltered installation is the conservative choice.

Will the mount block the router ports? +

The bracket uses an open front/back and side-access layout intended to preserve normal cable access when the hardware is positioned correctly.

Can I remove the router again after installation? +

Yes. Disconnect the cables first, then the slide-in structure allows the router and power adapter to be removed from the side.

Does this mount improve Starlink Wi-Fi speed? +

The bracket itself does not amplify Wi-Fi or increase network speed. Router placement, building layout and wireless interference still determine real-world Wi-Fi performance.

Will the bracket trap heat around the equipment? +

It uses an open-frame design rather than a closed enclosure, allowing surrounding airflow. Always maintain the equipment manufacturer's required ventilation clearance.

What colors are available? +

The current product is available in Black and White.

What are the published dimensions? +

Current product imagery shows approximately 13 cm / 5.12 in height, 8 cm / 3.15 in base depth, 17 cm / 6.7 in front support span and approximately 2 mm / 0.07 in metal thickness.

Is this the same as the plastic ABS Starlink wall mount? +

No. This version is a one-piece iron-alloy metal bracket. Separate ABS plastic Starlink Gen 3 wall-mount products use different structures and installation hardware.

What comes in the package? +

One metal wall mount, six green expansion tubes, six expansion screws and eight black anti-slip pads.

You can contact Teskay directly via the chat bubble in the bottom-right corner.
You can also reach our customer support team by emailing kay@teskay.com.

We will respond to your message within 24 hours.

Yes, absolutely. Paying on Teskay is safe and secure.

We use Shopify Payments, Shopify’s official payment system, to help ensure that every transaction is protected throughout the checkout process.

Bank-level security

Your payment information is encrypted and processed securely. We do not see or store your full card details.

Fraud protection

Shopify Payments uses advanced fraud detection and risk analysis tools to help prevent unauthorized transactions.

3D Secure verification

For some transactions, your bank may require additional verification to confirm that only the authorized cardholder can complete the payment.

Encrypted checkout

All payment data is protected with industry-standard encryption during the entire checkout process.

Trusted payment networks

Payments are processed through trusted global card networks such as Visa, Mastercard, and American Express.

In short, your payment on Teskay is handled through a secure and trusted payment infrastructure used by millions of customers worldwide, so you can shop with confidence.

📦 Processing Time

Orders are usually processed within 48 business hours after payment confirmation.

Please note that processing times may be slightly longer during weekends, holidays, or peak periods.

Some Tesla-related tools or accessories may include labels or stickers inside the package for identification or packaging purposes.

🚚 Shipping & Delivery

We offer free worldwide shipping on orders over $99 USD.

Please note that certain remote areas, such as islands or locations with limited carrier access (including Puerto Rico), may require an additional shipping fee. If this applies to your order, our customer service team will contact you before shipment.

Estimated delivery time for most standard orders: 7–13 business days (excluding order processing time).

For custom-made items, such as wheels or steering wheels, shipping times may vary. The estimated shipping time will be confirmed separately by our customer service team.

📌 Important Notes

Please make sure your shipping address and phone number are accurate and complete at checkout.

Teskay is not responsible for delivery issues caused by incorrect or incomplete shipping information provided by the customer.

Additional charges may apply for remote or hard-to-reach areas.

💬 Need Help?

If you have any questions about shipping or delivery, please feel free to contact our customer support team at kay@teskay.com. We are always happy to help.

Thank you for choosing Teskay ❤️

At Teskay LLC, we want you to enjoy a worry-free shopping experience. If you are not satisfied with your purchase, we are here to help.

🔄 30-Day Return Policy

You may request a return within 30 days of receiving your order.

Please contact us within this period to start the return process.

📦 Return Reasons & Fees

Defective, Damaged, or Incorrect Items

If the item you received is defective, damaged, or incorrect, we can offer you a full refund or a replacement.

All related costs will be covered by Teskay.
Non-Quality Returns

For returns due to personal reasons, such as change of mind, style preference, color preference, or ordering the wrong item, a 20% restocking fee will apply.

Return shipping costs are the responsibility of the customer.

📝 How to Start a Return

Please contact us at kay@teskay.com or through our live chat first.

Once your return request is approved, we will provide you with the return instructions.

Please do not send the item back without prior authorization, as unauthorized returns will not be accepted.

🚫 Non-Returnable Items

The following items cannot be returned unless there is a quality issue:

Customized products, such as steering wheels and rims

Gift cards

Hazardous materials or flammable items

If you are unsure whether your item is eligible for return, please contact us before making a purchase.

💰 Refunds & Exchanges

Once we receive and inspect your returned item, approved refunds will be issued to your original payment method within 1–3 business days.

Please note that the time it takes for the refund to appear in your account may vary depending on your bank or card issuer.

If you would like to exchange an item, we recommend returning the original item first and then placing a new order.

💬 Need Help?

Your satisfaction is important to us. If you have any questions, please feel free to contact us at kay@teskay.com. We are always happy to help.

Thank you for choosing Teskay ❤️