Headrest Ipad Phone Mount for Model 3 & Model Y

Headrest Tablet & Phone Holder for Tesla Model 3 / Model Y / Model YL

Create a more convenient rear-seat entertainment setup with a seat-back phone and tablet holder designed for Tesla front-seat geometry. A rigid ABS body, soft silicone contact surfaces, 360° adjustable ball joint and dual-spring clamp help keep compatible devices positioned for rear passengers.

Rear-Seat Entertainment Without Holding the Device

Hands-Free Passenger Viewing
Rear passengers can position a compatible smartphone or tablet at a convenient viewing angle instead of holding the device throughout the trip.

Portrait or Landscape Orientation
The rotating joint lets the device be turned to match movies, games, video calls or other content.

Quick Removal When Not Needed
The seat-back mounting design allows the holder to be removed without permanent modification to the vehicle interior.

ABS Body + Silicone Grip

360° Ball-Joint Adjustment

The supplier specifies a 360° rotating ball-joint mount, allowing the device orientation and viewing angle to be adjusted after installation.

⚠️ Device Weight Affects Angle Stability

Large or heavy tablets can place more load on the ball joint than smaller phones. The supplier does not publish a maximum supported device weight, so always confirm that the chosen angle remains stable before driving.

Dual-Spring Device Clamp

The clamp uses internal high-strength springs to maintain pressure against compatible phones and tablets.

Soft silicone contact surfaces help increase friction while reducing direct hard-surface contact with the device.

⚠️ Check Device Security Before Driving

After mounting a phone or tablet, gently test the clamp and viewing angle before the vehicle moves. Do not use a device that is too large, too heavy or cannot be securely retained by the holder.

Charging Access on Both Sides

The supplier states that charging openings are reserved on both ends of the holder so compatible charging cables can remain connected while the device is mounted.

This Holder Does Not Include Charging Electronics

The openings only provide cable clearance. The mount does not contain a charger, USB hub, wireless charging coil or power supply.

Integrated Utility Hook

The holder also includes a hook that can be used for lightweight everyday items such as small shopping bags, garbage bags or umbrellas.

Keep hanging items light and make sure they cannot swing into passengers or interfere with seat movement.

⚠️ Hook Load Rating Is Not Published

The supplier does not publish a tested maximum hook load. Use the hook only for lightweight everyday items and avoid heavy bags or objects that could overload the mount.

Current Vehicle Options

⚠️ Choose the Correct Seat-Back Version

Tesla changed the front-seat rear geometry on refreshed vehicles. The current product selector separates the older Model 3 / Model Y version from the Model 3 Highland / Model Y Juniper / Model YL version. Choose according to your actual vehicle generation.

⚠️ Aftermarket Seat Covers May Affect Installation

The supplier FAQ states that this holder connects to the back of the seat. If an aftermarket seat cover blocks the mounting gap or attachment point, the holder may not be able to install correctly.

Tool-Free Installation

1. Confirm the Vehicle Version
Select the holder version that matches your Tesla front-seat generation.

2. Locate the Seat-Back Gap
Identify the compatible gap between the seat backing and cushion area.

3. Insert the Mount
Slide the mounting section into the seat-back gap until it locks securely into position.

4. Attach the Device
Open the spring clamp and center the compatible phone or tablet between the silicone contact points.

5. Adjust the Angle
Rotate and tilt the ball joint until the rear passenger has a comfortable viewing angle.

6. Check Stability
Gently move the device and holder to verify that both remain securely positioned before driving.

No Drilling, Adhesive or Headrest-Rod Removal

The current Tesery design mounts directly to the compatible Tesla seat-back structure. It does not rely on traditional exposed headrest rods and does not require drilling or adhesive.

⚠️ Position Away From Passenger Impact Zones

Mount and angle the device so it does not sit unnecessarily close to a rear passenger's face or head. During sudden braking or a collision, any rigid mounted device can become an impact hazard.

⚠️ Keep Clear of Seat Safety Components

Do not install or route accessories over seat-mounted airbag seams, seat-belt components, wiring, seat controls or other factory safety equipment. If installation interferes with any seat function, remove the holder.

Exact Device Size Range Is Not Published

The current exact product page states compatibility with a variety of smartphones and tablets but does not publish a minimum / maximum device width, screen-size range or maximum device weight. Do not add fixed inch-size claims unless separately confirmed.

Color

Black

Cleaning & Care

Routine Cleaning
Wipe the ABS and silicone surfaces with a clean microfiber cloth.

Light Dirt
Use a slightly damp cloth and dry the holder afterward.

Inspect the Clamp
Periodically check that the spring clamp and ball joint continue to hold the device securely.

Avoid Harsh Chemicals
Do not use strong solvents or abrasive cleaning pads on the ABS or silicone surfaces.

Specifications

⚠️ Unpublished Specifications

The current exact product page does not publish the minimum or maximum device width, supported screen-size range, maximum tablet weight, maximum hook load, product dimensions or product weight. Do not add these specifications unless separately confirmed for this exact product.

Package Includes

1 × Headrest / Seat-Back Tablet & Phone Holder

Quick Answers