Lifetime Replacement
Front Bumper Fog Light Replacement for Model 3/Y
Model 3 (17-23) & Model Y (20-24) / Shanghai / Berlin Giga (1624797/1624798) / Left
$99.00 USD
Skip to product information
Front Bumper Fog Light Replacement for Model 3/Y
$99.00 USD
-
Order now, estimated delivery: Calculating...
Free shipping on orders over $99
-
30-day free returns & exchanges
Product Description
Product Description
Front Bumper Fog Light Replacement for Tesla Model 3 & Model Y
Restore damaged, cloudy or failed front fog-light assemblies with vehicle-specific replacement units designed around the factory bumper mounting points, electrical connectors and original lamp profile.
OEM-style fit · IP67 sealed housing · Plug & play
🎯
Factory-Style Fitment
Molded around the compatible Tesla front bumper mounting locations so the replacement assembly aligns with the original mounting tabs and surrounding trim.
🌫️
Wide Fog-Light Beam
Optical elements are designed to spread illumination across road edges and shoulders for additional visibility during fog, rain, snow and other reduced-visibility conditions.
🔌
Original-Style Plug Connection
Connects through the compatible factory fog-light harness without cutting, splicing or permanently altering the vehicle's original wiring.
Why This Fog Light Replacement Stands Out
🧩
Direct replacement instead of a universal lamp
Vehicle-specific housings retain the original-style mounting geometry, helping restore the factory bumper appearance without fabricating custom brackets.
🧱
High-impact ABS housing
The rigid ABS body is designed for exterior bumper use and resistance to normal road vibration and debris exposure.
🌧️
IP67 sealed against weather
The sealed assembly carries an IP67 rating for protection against rain, road spray, dust and normal exterior exposure.
☀️
UV-resistant lens construction
The exterior lens is designed to resist UV-related discoloration and maintain a cleaner appearance during normal long-term outdoor use.
🔁
Reversible electrical installation
The original-style connector and factory mounting points allow replacement without cutting the vehicle harness or drilling new mounting holes.
Check the Factory Before Ordering
Two visually similar versions use different housings and reference numbers. Match your vehicle's production origin or existing lamp part number before selecting Fremont / Texas or Shanghai / Berlin.
Two Factory-Specific Versions
Confirm Model, Production Origin & Side
Model 3
2017–2023.10
Not for Model 3 Highland 2024+
Model Y
2020–2025.02
Not for Model Y Juniper 2025.03+
Fremont / Texas Giga
Left: 1077391
Right: 1077392
Shanghai / Berlin Giga
Left: 1624797
Right: 1624798
Plug & Play Replacement
1. Verify the Existing Lamp
Confirm the vehicle model, production period, production plant and existing fog-light reference number before removal.
2. Access the Fog-Light Assembly
Safely access the corresponding front bumper fog-light area and remove the original assembly from its factory mounting points.
3. Connect the Factory Harness
Disconnect the old lamp and attach the replacement unit using the matching vehicle connector. No wire cutting or splicing is required.
4. Test Before Reassembly
Test the replacement lamp before fully reinstalling the surrounding trim, then verify that all mounting points are secure.
Do Not Order by Model Year Alone
Fremont / Texas and Shanghai / Berlin vehicles use different front fog-light assemblies. Whenever possible, check the original lamp number or confirm the vehicle's manufacturing plant before selecting your replacement.
Installation Time
Manufacturer guidance lists approximately 30–60 minutes for a complete replacement depending on technician experience, access method and whether one or both sides are being replaced.
Specifications
| Attribute | Details |
|---|---|
| Product | Front Bumper Fog Light Replacement |
| Model 3 Compatibility | Tesla Model 3 2017–2023.10 |
| Model Y Compatibility | Tesla Model Y 2020–2025.02 |
| Not Compatible | Model 3 Highland 2024+ / Model Y Juniper 2025.03+ |
| Fremont / Texas Left | OEM Reference 1077391 |
| Fremont / Texas Right | OEM Reference 1077392 |
| Shanghai / Berlin Left | OEM Reference 1624797 |
| Shanghai / Berlin Right | OEM Reference 1624798 |
| Housing Material | High-Impact ABS |
| Lens | UV-Resistant Exterior Lens |
| Weather Rating | IP67 |
| Beam Design | Wide Fog-Light Pattern / Road-Edge Illumination |
| Certification | DOT Approved / E-Mark Certified |
| Electrical Connection | Factory-Style Plug & Play Connector |
| Wire Cutting / Splicing | Not Required |
| Drilling | Not Required |
| Mounting | Existing Factory Mounting Points |
| Available Positions | Left / Right / Left + Right |
| Package | Selected Fog Light Assembly: Left, Right, or Left + Right |
Quick Answers
Which Tesla models does this fog light fit? +
The current TESKAY compatibility guide lists Model 3 2017–2023.10 and Model Y 2020–2025.02, provided the correct production-plant version is selected.
Does it fit Model 3 Highland? +
No. Model 3 Highland 2024+ uses a different front-light assembly and mounting structure.
Does it fit Model Y Juniper? +
No. Model Y Juniper 2025.03+ uses a different refreshed front-light configuration.
Why do I need to choose a manufacturing plant? +
Fremont / Texas and Shanghai / Berlin vehicles use different fog-light assemblies and part-number families. Their housings should not be assumed interchangeable.
What are the US / Fremont-Texas part numbers? +
The current reference numbers are 1077391 for the left side and 1077392 for the right side.
What are the Shanghai / Berlin part numbers? +
The current reference numbers are 1624797 for the left side and 1624798 for the right side.
Can I purchase only one side? +
Yes. Current TESKAY options include Left, Right, and Left + Right.
Does installation require cutting wires? +
No. The replacement connects through the compatible factory-style fog-light connector without cutting or splicing original wiring.
Does installation require drilling? +
No. The replacement uses the corresponding factory mounting locations rather than requiring new holes in the bumper.
Is the fog light waterproof? +
The current manufacturer specification lists an IP67 weather-protection rating.
Are these DOT and E-Mark certified? +
Current manufacturer documentation identifies the lamp assemblies as DOT approved and E-Mark certified.
How difficult is installation? +
Electrical connection is plug-and-play, but physical access to the front bumper lamp area is required. Manufacturer guidance lists approximately 30–60 minutes for a complete replacement, depending on experience and access.
How can I confirm the correct version before ordering? +
Check the vehicle's manufacturing origin and, preferably, compare the reference number printed on the original lamp. If uncertain, verify the vehicle VIN and existing fog-light assembly before selecting the variant.
How can I contact Teskay?
How can I contact Teskay?
- You can contact Teskay directly via the chat bubble in the bottom-right corner.
- You can also reach our customer support team by emailing kay@teskay.com.
We will respond to your message within 24 hours.
Is it safe to make a payment on Teskay?
Is it safe to make a payment on Teskay?
Yes, absolutely. Paying on Teskay is safe and secure.
We use Shopify Payments, Shopify’s official payment system, to help ensure that every transaction is protected throughout the checkout process.
Bank-level security
Your payment information is encrypted and processed securely. We do not see or store your full card details.
Fraud protection
Shopify Payments uses advanced fraud detection and risk analysis tools to help prevent unauthorized transactions.
3D Secure verification
For some transactions, your bank may require additional verification to confirm that only the authorized cardholder can complete the payment.
Encrypted checkout
All payment data is protected with industry-standard encryption during the entire checkout process.
Trusted payment networks
Payments are processed through trusted global card networks such as Visa, Mastercard, and American Express.
In short, your payment on Teskay is handled through a secure and trusted payment infrastructure used by millions of customers worldwide, so you can shop with confidence.
Shipping Policy
Shipping Policy
📦 Processing Time
Orders are usually processed within 48 business hours after payment confirmation.
Please note that processing times may be slightly longer during weekends, holidays, or peak periods.
Some Tesla-related tools or accessories may include labels or stickers inside the package for identification or packaging purposes.
🚚 Shipping & Delivery
We offer free worldwide shipping on orders over $99 USD.
Please note that certain remote areas, such as islands or locations with limited carrier access (including Puerto Rico), may require an additional shipping fee. If this applies to your order, our customer service team will contact you before shipment.
Estimated delivery time for most standard orders: 7–13 business days (excluding order processing time).
For custom-made items, such as wheels or steering wheels, shipping times may vary. The estimated shipping time will be confirmed separately by our customer service team.
📌 Important Notes
Please make sure your shipping address and phone number are accurate and complete at checkout.
Teskay is not responsible for delivery issues caused by incorrect or incomplete shipping information provided by the customer.
Additional charges may apply for remote or hard-to-reach areas.
💬 Need Help?
If you have any questions about shipping or delivery, please feel free to contact our customer support team at kay@teskay.com. We are always happy to help.
Thank you for choosing Teskay ❤️
Refund Policy
Refund Policy
At Teskay LLC, we want you to enjoy a worry-free shopping experience. If you are not satisfied with your purchase, we are here to help.
🔄 30-Day Return Policy
You may request a return within 30 days of receiving your order.
Please contact us within this period to start the return process.
📦 Return Reasons & Fees
- Defective, Damaged, or Incorrect Items
If the item you received is defective, damaged, or incorrect, we can offer you a full refund or a replacement.
All related costs will be covered by Teskay. - Non-Quality Returns
For returns due to personal reasons, such as change of mind, style preference, color preference, or ordering the wrong item, a 20% restocking fee will apply.
Return shipping costs are the responsibility of the customer.
📝 How to Start a Return
Please contact us at kay@teskay.com or through our live chat first.
Once your return request is approved, we will provide you with the return instructions.
Please do not send the item back without prior authorization, as unauthorized returns will not be accepted.
🚫 Non-Returnable Items
The following items cannot be returned unless there is a quality issue:
Customized products, such as steering wheels and rims
Gift cards
Hazardous materials or flammable items
If you are unsure whether your item is eligible for return, please contact us before making a purchase.
💰 Refunds & Exchanges
Once we receive and inspect your returned item, approved refunds will be issued to your original payment method within 1–3 business days.
Please note that the time it takes for the refund to appear in your account may vary depending on your bank or card issuer.
If you would like to exchange an item, we recommend returning the original item first and then placing a new order.
💬 Need Help?
Your satisfaction is important to us. If you have any questions, please feel free to contact us at kay@teskay.com. We are always happy to help.
Thank you for choosing Teskay ❤️
How to view the installation video?
How to view the installation video?
Questions & Answers loading...
You may also like
Free Shipping
Free worldwide shipping over $99
Secure Payment
100% secure payment processing
Easy Returns
30-day return policy on all items(Customized products excluded)
Service Excellence
Fast customer support response service