Rear Vent Cover for Tesla Model 3 / Y 2017-Present

Rear Under-Seat Air Vent Cover for Tesla Model 3 / Model Y / Model YL

Help keep small debris away from the rear under-seat air vents with a breathable mesh protector designed to sit over the factory vent opening. The fine mesh helps block lint, hair, crumbs and other small debris while maintaining airflow through the HVAC outlet.

Protect an Easily Overlooked HVAC Opening

Located Beneath the Front Seats
The rear-facing under-seat vents deliver HVAC airflow toward the rear passenger area but can also be exposed to loose debris on the cabin floor.

Helps Reduce Vent Clogging
The mesh catches larger loose particles before they can enter directly through the vent opening.

Simple Removable Protection
Because the cover is attached with Velcro rather than permanent fasteners, it can be removed for cleaning or inspection when necessary.

Designed to Maintain Ventilation

The supplier specifically states that the uniformly sized mesh openings are designed to preserve normal airflow through the under-seat air outlet while helping block debris.

⚠️ Keep the Mesh Clean

Any mesh can restrict airflow if it becomes heavily covered with dust, lint or debris. Inspect and clean the protector periodically and remove any buildup that blocks the openings.

Mesh + Velcro Construction

Material Specification Note

The supplier's main product description repeatedly identifies the construction as mesh and Velcro, while a separate specification line refers to “high-quality leather.” Because those statements conflict, this listing uses the mesh-and-Velcro construction supported by the product's functional description and does not claim a leather construction.

Vehicle Compatibility

⚠️ Supplier Model Y Year Text Is Inconsistent

The current supplier specification displays “Model Y 2017-Present,” which appears inconsistent with the Model Y product timeline. For this reason, the Model Y year range is not repeated as a fixed fitment claim here. Compare your under-seat vent shape with the product photos before ordering.

Fitment Depends on the Under-Seat Vent Shape

This accessory attaches directly around the under-seat HVAC outlet. If your vehicle was produced near an interior refresh or uses a different seat / vent structure, visually confirm the vent shape before ordering.

What It Helps Keep Out

Hair & Lint
Helps catch loose fibers before they enter directly through the vent opening.

Crumbs & Small Debris
Useful where rear passengers or children may accidentally drop small pieces of debris near the floor.

Small Loose Objects
The mesh creates another physical barrier over an otherwise exposed vent opening.

Dust Buildup
Can reduce direct entry of larger dust particles while remaining removable for routine cleaning.

⚠️ This Is a Debris Screen, Not an Air Filter

This mesh cover is intended to block larger physical debris. It should not be marketed as a HEPA filter, PM2.5 filter, activated-carbon filter or air-purification product.

Tool-Free Installation

1. Locate the Under-Seat Vent
Move the front seat as needed to gain clear access to the rear-facing air outlet underneath the seat.

2. Clean the Surrounding Area
Remove loose dust, lint and debris from around the vent and nearby carpet.

3. Align the Protector
Center the mesh over the entire air outlet without folding or bunching the material.

4. Secure the Velcro
Press the integrated Velcro firmly against the compatible surrounding surface.

5. Check the Fit
Make sure the cover remains flat, securely attached and does not contact moving seat components.

⚠️ Check Full Seat Movement After Installation

Move the front seat forward and backward through its normal adjustment range after installation. Make sure the protector does not catch on seat rails, wiring, motors or other moving components.

⚠️ Keep Clear of Under-Seat Wiring

Do not wrap the Velcro around electrical wiring, connectors, seat motors, restraint-system components or moving seat hardware. The protector should cover only the intended air outlet area.

Cleaning & Maintenance

Inspect Regularly
Check the mesh periodically for accumulated lint, hair or debris.

Remove Loose Dirt
Use a soft brush, vacuum or dry cloth to clear the mesh openings.

Remove for Deeper Cleaning
Detach the Velcro carefully if the protector needs a more thorough cleaning.

Reinstall Completely Dry
Make sure the protector is clean and dry before reattaching it over the vent.

Specifications

⚠️ Unpublished Specifications

The current exact product page does not publish the mesh opening size, product dimensions, product weight, airflow reduction percentage, filtration rating or a verified abrasion-test value. Do not add these specifications unless separately confirmed for this exact product.

Package Includes

1 × Rear Under-Seat Air Vent Cover

Quick Answers