Lifetime Replacement
LAN Extension Cable | 26AWG 10Gbps Pure Copper for Starlink Gen2/Gen3
GEN3 IP67 / 9.84 feet / 3M
$22.43 USD
Skip to product information
LAN Extension Cable | 26AWG 10Gbps Pure Copper for Starlink Gen2/Gen3
$22.43 USD
-
Order now, estimated delivery: Calculating...
Free shipping on orders over $99
-
30-day free returns & exchanges
Product Description
Product Description
High-Speed Ethernet Extension Cable for Starlink Gen 2 & Gen 3
Extend your Starlink installation without cutting or modifying the original network cable. Built with a 26AWG copper twisted-pair core, shielded connectors and weather-resistant construction, this extension cable gives you more freedom to place your dish and router where they work best.
Gen 3 IP67 / Gen 3 / Gen 2 · 5M / 23M / 46M · Up to 1200Mbps
🚀
Up to 1200Mbps Data Transfer
Current manufacturer specifications list data transmission up to 1200Mbps, helping maintain a stable wired connection across longer Starlink installations.
🧵
26AWG Copper Core
Manufacturer-listed 26AWG copper conductors use a twisted-pair layout designed to reduce crosstalk and support stable network transmission.
🌧️
Indoor & Outdoor Ready
A durable outer jacket, sealed connector design and corrosion-resistant construction make the cable suitable for permanent or semi-permanent Starlink installations.
More Freedom to Position Your Starlink
📡
Move the dish to a better location
Extra cable length makes it easier to place the Starlink antenna where it has a clearer view of the sky while keeping networking equipment in a protected location.
🏠
Flexible home and office routing
Route the connection through an attic, garage, exterior wall or equipment room without relocating the entire Starlink setup.
🏕️
Better outdoor installation flexibility
Useful for RV sites, cabins, workshops and other installations where the router and dish need to be positioned farther apart.
🛡️
Shielded connector construction
Manufacturer-listed metal shielding and plated connector contacts help protect the network connection from oxidation and electrical interference.
🔌
No cable cutting or re-termination
Choose the correct Starlink generation and connect the pre-terminated cable instead of manually splicing or crimping your original Starlink cable.
Gen 2 and Gen 3 Are Separate Cable Options
The current selector offers GEN3 IP67, GEN3 and GEN2 as separate variants. Choose the version matching your Starlink hardware instead of assuming one physical connector works with every generation.
Generation-Specific Connector Designs
Shielded Contacts
Current manufacturer copy identifies metal-shielded RJ45-style connections with plated contacts on applicable versions.
Silicone Sealing Ring
Sealing rings around applicable connectors help limit water intrusion at exposed connection points.
Flexible Durable Jacket
The outer jacket is manufacturer-described as wear, bending, pull, UV, aging and corrosion resistant.
Choose the Right Length Before Routing
5M / 16.40 FT
Useful for shorter room-to-wall, roof-entry or equipment-rack extensions.
23M / 75.46 FT
A practical mid-length option for residential, garage, workshop or RV-site installations.
46M / 150.92 FT
Provides substantially more routing distance for large properties or installations where the dish and networking equipment must be widely separated.
1. Identify Your Starlink Generation
Verify whether your hardware requires the GEN2, GEN3 or GEN3 IP67 cable configuration.
2. Measure the Complete Route
Measure around walls, roof entries, bends and equipment locations rather than using straight-line distance alone.
3. Leave Service Slack
Leave enough extra cable at both ends for connector access, equipment movement and future maintenance.
4. Protect Outdoor Connections
Seat all weather seals completely and avoid positioning connection points where standing water can accumulate.
5. Avoid Tight Bends
Route the cable with smooth curves and avoid crushing, pinching or repeatedly flexing it around sharp edges.
6. Test Before Final Securing
Confirm normal Starlink connectivity before permanently securing the cable along the complete route.
Do Not Order by “Gen 2 / Gen 3 Compatible” Wording Alone
This listing covers multiple Starlink generations through separate selectable versions. The connector at each end must match your actual Starlink hardware.
Specifications
| Attribute | Details |
|---|---|
| Product | Starlink High-Speed Ethernet Extension Cable |
| Starlink Version Options | GEN3 IP67 / GEN3 / GEN2 |
| Gen 3 Application | Starlink Gen 3 Standard Kit — Select Correct Gen 3 Variant |
| Gen 2 Application | Compatible Starlink Gen 2 Systems — Select GEN2 Variant |
| Length Options | 5M / 23M / 46M |
| Approx. Imperial Lengths | 16.40 FT / 75.46 FT / 150.92 FT |
| Manufacturer-Listed Conductor | 26AWG Pure Copper |
| Internal Wiring | Twisted-Pair Construction |
| Current Detailed Data Rating | Up to 1200Mbps |
| Product Title Data Claim | 10Gbps — Conflicts with Current Detailed 1200Mbps Specification |
| Connector Construction | Generation-Specific Shielded Network Connectors |
| Contact Finish | Manufacturer Lists Gold-Plated or Nickel-Plated Contacts |
| Connector Seal | Sealed Silicone Ring on Applicable Connector Design |
| GEN3 IP67 Version | IP67 Designation in Current Variant Selector |
| Standard GEN3 / GEN2 IP Rating | Not Clearly Separated in Current Technical Documentation |
| Outdoor Use | Supported by Current Manufacturer Description |
| Jacket Properties | Wear / Bend / Pull / UV / Aging / Corrosion Resistant per Manufacturer |
| Flame Resistance | Outer Jacket Described by Manufacturer as Fire-Resistant |
| Cable Color | Deep Gray |
| Installation | Pre-Terminated / Plug-and-Connect |
| Cable Cutting / Crimping | Not Required |
| Package | 1 × Selected Starlink Generation-Specific Extension Cable |
Quick Answers
Which exact variant is selected by the supplied URL? +
The supplied URL does not contain a variant ID. When the current source page is opened, the default selector displays GEN3 IP67 with the 5M / 16.40 FT length.
Does one cable fit both Gen 2 and Gen 3? +
The listing covers both generations through separate GEN2 and GEN3 selectable versions. Choose the connector configuration matching your actual Starlink hardware.
Which lengths are currently available? +
Current options are 5 meters / 16.40 feet, 23 meters / 75.46 feet and 46 meters / 150.92 feet.
Is the cable 10Gbps or 1200Mbps? +
The current product title contains a 10Gbps claim, while the more detailed current technical description specifies up to 1200Mbps. This page therefore uses the more conservative 1200Mbps specification.
Is every version IP67? +
The current selector specifically labels one option “GEN3 IP67” while also offering a separate standard “GEN3” and “GEN2” option. For that reason, this description does not automatically assign an IP67 rating to every version.
Can I use the cable outdoors? +
Yes. The current manufacturer describes the cable as suitable for indoor and outdoor Starlink installations. Outdoor connection points should still be properly seated and protected.
What is the cable conductor made from? +
The current product title identifies the cable as 26AWG pure copper with twisted-pair construction.
Does it require cutting my original Starlink cable? +
No. The cable is supplied with pre-terminated connectors and is intended for direct connection without field crimping or cutting the original cable.
Will a longer cable automatically increase my Starlink speed? +
No. An extension cable provides additional placement and routing flexibility. Actual Starlink internet speed still depends on the service, network conditions, dish visibility, equipment and the complete installation.
Can the 46M cable be routed around a building? +
Yes, provided the selected version matches your equipment and the cable is routed without crushing, excessive tension, sharp bends or exposed unsealed connection points.
Is this the same as a Starlink Ethernet adapter? +
No. This product is an extension cable. It does not replace a separate Ethernet adapter that may be required by a specific Starlink hardware generation or network configuration.
Is this a complete Starlink replacement dish cable? +
This listing is sold as a LAN / Ethernet extension cable. Confirm the connection points in your intended installation before using it as a replacement for any original Starlink dish-to-router cable.
How can I contact Teskay?
How can I contact Teskay?
- You can contact Teskay directly via the chat bubble in the bottom-right corner.
- You can also reach our customer support team by emailing kay@teskay.com.
We will respond to your message within 24 hours.
Is it safe to make a payment on Teskay?
Is it safe to make a payment on Teskay?
Yes, absolutely. Paying on Teskay is safe and secure.
We use Shopify Payments, Shopify’s official payment system, to help ensure that every transaction is protected throughout the checkout process.
Bank-level security
Your payment information is encrypted and processed securely. We do not see or store your full card details.
Fraud protection
Shopify Payments uses advanced fraud detection and risk analysis tools to help prevent unauthorized transactions.
3D Secure verification
For some transactions, your bank may require additional verification to confirm that only the authorized cardholder can complete the payment.
Encrypted checkout
All payment data is protected with industry-standard encryption during the entire checkout process.
Trusted payment networks
Payments are processed through trusted global card networks such as Visa, Mastercard, and American Express.
In short, your payment on Teskay is handled through a secure and trusted payment infrastructure used by millions of customers worldwide, so you can shop with confidence.
Shipping Policy
Shipping Policy
📦 Processing Time
Orders are usually processed within 48 business hours after payment confirmation.
Please note that processing times may be slightly longer during weekends, holidays, or peak periods.
Some Tesla-related tools or accessories may include labels or stickers inside the package for identification or packaging purposes.
🚚 Shipping & Delivery
We offer free worldwide shipping on orders over $99 USD.
Please note that certain remote areas, such as islands or locations with limited carrier access (including Puerto Rico), may require an additional shipping fee. If this applies to your order, our customer service team will contact you before shipment.
Estimated delivery time for most standard orders: 7–13 business days (excluding order processing time).
For custom-made items, such as wheels or steering wheels, shipping times may vary. The estimated shipping time will be confirmed separately by our customer service team.
📌 Important Notes
Please make sure your shipping address and phone number are accurate and complete at checkout.
Teskay is not responsible for delivery issues caused by incorrect or incomplete shipping information provided by the customer.
Additional charges may apply for remote or hard-to-reach areas.
💬 Need Help?
If you have any questions about shipping or delivery, please feel free to contact our customer support team at kay@teskay.com. We are always happy to help.
Thank you for choosing Teskay ❤️
Refund Policy
Refund Policy
At Teskay LLC, we want you to enjoy a worry-free shopping experience. If you are not satisfied with your purchase, we are here to help.
🔄 30-Day Return Policy
You may request a return within 30 days of receiving your order.
Please contact us within this period to start the return process.
📦 Return Reasons & Fees
- Defective, Damaged, or Incorrect Items
If the item you received is defective, damaged, or incorrect, we can offer you a full refund or a replacement.
All related costs will be covered by Teskay. - Non-Quality Returns
For returns due to personal reasons, such as change of mind, style preference, color preference, or ordering the wrong item, a 20% restocking fee will apply.
Return shipping costs are the responsibility of the customer.
📝 How to Start a Return
Please contact us at kay@teskay.com or through our live chat first.
Once your return request is approved, we will provide you with the return instructions.
Please do not send the item back without prior authorization, as unauthorized returns will not be accepted.
🚫 Non-Returnable Items
The following items cannot be returned unless there is a quality issue:
Customized products, such as steering wheels and rims
Gift cards
Hazardous materials or flammable items
If you are unsure whether your item is eligible for return, please contact us before making a purchase.
💰 Refunds & Exchanges
Once we receive and inspect your returned item, approved refunds will be issued to your original payment method within 1–3 business days.
Please note that the time it takes for the refund to appear in your account may vary depending on your bank or card issuer.
If you would like to exchange an item, we recommend returning the original item first and then placing a new order.
💬 Need Help?
Your satisfaction is important to us. If you have any questions, please feel free to contact us at kay@teskay.com. We are always happy to help.
Thank you for choosing Teskay ❤️
How to view the installation video?
How to view the installation video?
Questions & Answers loading...
You may also like
Free Shipping
Free worldwide shipping over $99
Secure Payment
100% secure payment processing
Easy Returns
30-day return policy on all items(Customized products excluded)
Service Excellence
Fast customer support response service