Lifetime Replacement
Car Roof/Window Suction Cup Mount Bracket for Starlink Mini
$40.79 USD
Skip to product information
Car Roof/Window Suction Cup Mount Bracket for Starlink Mini
$40.79 USD
-
Order now, estimated delivery: Calculating...
Free shipping on orders over $99
-
30-day free returns & exchanges
Product Description
Product Description
Adjustable Dual-Suction Vehicle Mount for Starlink Mini
Mount your Starlink Mini on vehicle glass, sunroofs and other suitable smooth surfaces without drilling permanent holes. The SL-01 combines large vacuum suction cups with multi-axis adjustment for flexible temporary Starlink positioning while traveling, camping or working remotely.
Starlink Mini · Dual 9cm suction cups · 360° adjustment · Tool-free mounting
🧲
Large Vacuum Suction Cups
Current manufacturer specifications list approximately 3.54-inch / 9cm diameter suction cups for a larger sealing area on compatible smooth, non-porous surfaces.
🔄
Multi-Axis Angle Adjustment
A 360° universal ball joint and gear-meshing rotating shaft allow the Starlink Mini angle to be adjusted for different glass, sunroof and roof mounting positions.
🛠️
Tool-Free Temporary Mounting
The press-lock suction mechanism creates a vacuum connection without drilling into the vehicle, making the mount easier to install, reposition and remove.
Flexible Starlink Mini Positioning Without Permanent Roof Holes
🚙
Multiple vehicle mounting locations
Use the mount on suitable windshields, rear glass, glass sunroofs or compatible smooth exterior surfaces depending on the vehicle and desired Starlink position.
🏕️
Practical for temporary camps and road trips
Set up Starlink Mini when you arrive, then release the suction mechanism and remove the mount when it is time to pack the equipment away.
📐
Adaptable to different surface angles
Independent articulation at the suction assemblies helps position the support arms against differently angled glass or roof geometry.
🌤️
Indoor or exterior positioning
Product imagery shows both inside-glass and exterior mounting configurations, giving users more options depending on weather, signal visibility and vehicle layout.
🛰️
Built specifically around Starlink Mini
The central support bracket is shaped for the compact Starlink Mini terminal rather than functioning as a generic tablet or antenna holder.
No Published Speed or Load Rating
The current product page does not publish a verified maximum vehicle speed, pull-force rating, static load capacity or third-party in-motion mounting certification. For exterior use, always inspect suction before every use and avoid treating the mount as permanently secured hardware.
Dual Suction Support with Adjustable Joints
Quick Vacuum Mounting on Smooth Surfaces
1. Choose a Suitable Surface
Use clean glass or another sufficiently smooth, non-porous surface that allows each suction cup to make complete contact.
2. Clean and Dry the Area
Remove dust, wax, oil, water and surface contamination from both the mounting surface and suction cups before use.
3. Position Both Suction Cups
Adjust the articulated support arms so both cups sit flat against their mounting surfaces without twisting the bracket.
4. Create the Vacuum Seal
Engage the press-lock mechanism on each suction assembly and confirm that both cups are fully seated.
5. Adjust the Starlink Angle
Use the ball joints and rotating shafts to position the Mini with as clear a view of the sky as practical, then tighten the adjustment points.
6. Inspect Before Every Use
Pull gently on the bracket to confirm secure suction and re-check the vacuum connection periodically, especially after temperature changes or extended installation.
Exterior In-Motion Use Requires Extra Caution
Starlink Mini hardware can support in-motion service with eligible plans in authorized locations, but this third-party suction mount does not currently publish a tested vehicle-speed rating or official Starlink in-motion mount certification. For exterior vehicle installation, stationary use is the conservative choice unless the mounting method and local requirements have been independently verified.
A Clear View of the Sky Still Matters
The mount changes where the Starlink Mini can be positioned, but it cannot eliminate signal obstruction. Trees, roof structures, coated glass and surrounding objects may affect service depending on the chosen installation location.
Specifications
| Attribute | Details |
|---|---|
| Product | SL-01 Car Roof / Window Suction Cup Mount Bracket |
| Device Compatibility | Starlink Mini |
| Suction Configuration | Dual Suction Assemblies Shown in Current Product Design |
| Suction Cup Diameter | Approx. 3.54 in / 9 cm Each |
| Primary Adjustment | 360° Universal Ball Joint |
| Secondary Adjustment | Gear-Meshing Rotating Shaft |
| Installation Method | Press-Lock Vacuum Suction |
| Tools Required | No Tools Required for Surface Suction Installation |
| Drilling | Not Required |
| Suitable Surface Type | Clean, Smooth, Non-Porous Surfaces |
| Typical Locations | Windshield / Rear Window / Glass Sunroof / Suitable Smooth Vehicle Roof |
| Finish | Light Gray |
| Weather Resistance | Manufacturer Describes Weather-Resistant Outdoor Construction |
| Published IP Rating | Not Published |
| Exact Main Material | Not Reliably Published |
| Maximum Load Capacity | Not Published |
| Published Suction Force | Not Published |
| Published Vehicle Speed Rating | Not Published |
| Official Starlink In-Motion Mount Certification | Not Published for This Third-Party Mount |
| Overall Mount Dimensions | Not Published |
| Package Contents | Starlink Mini SL-01 Suction Cup Mount Bracket Assembly; Detailed Component Packing List Not Separately Published |
Quick Answers
Which Starlink model does this mount fit? +
The SL-01 shown here is designed specifically for Starlink Mini. It should not be assumed compatible with Standard Gen 2, Standard Gen 3 or larger Performance terminals.
How many suction cups does the mount use? +
The current SL-01 product design shows two suction-cup assemblies, one supporting each side of the central Starlink bracket.
How large are the suction cups? +
The current manufacturer specification lists approximately 3.54 inches / 9cm in diameter.
Can I install it on a glass sunroof? +
Yes, provided the chosen glass area is clean, smooth, non-porous and large enough for both suction cups to establish a complete vacuum seal.
Can it mount inside the vehicle on the glass? +
Current product imagery shows interior glass mounting as one possible configuration. Signal quality will still depend on the Mini's view of the sky and the characteristics of the vehicle glass.
Can I put it on the exterior roof? +
The manufacturer lists suitable smooth exterior roof surfaces as a mounting option. For the most conservative use, exterior roof mounting should be treated as a stationary setup unless safe in-motion attachment has been independently verified.
Can I drive with the mount attached outside? +
The mount does not currently publish a verified maximum vehicle-speed rating or official Starlink in-motion mount certification. Do not assume that suction attachment alone is sufficient for high-speed exterior use.
Does Starlink Mini itself support in-motion service? +
Starlink currently lists Mini among hardware capable of supported in-motion service, but availability depends on the service plan, country or region and an appropriately secured installation.
Can I adjust the Starlink angle? +
Yes. The mount uses a 360° universal ball joint together with a gear-meshing rotating shaft for multi-axis positioning.
Does installation require drilling into the roof? +
No. The mount attaches by vacuum suction and does not require drilling holes through the vehicle roof or glass.
Can it be removed and reused? +
Yes. Release the vacuum mechanism, remove the mount and clean the suction surfaces before the next installation.
Will it work on textured or porous surfaces? +
Vacuum suction works best on smooth, clean, non-porous surfaces. Heavily textured, porous or uneven materials may not create a reliable seal.
Is it weatherproof? +
The manufacturer describes the SL-01 as weather-resistant for outdoor use, but no verified IP rating or standardized environmental test result is currently published.
Is there a published maximum load or suction force? +
No verified kilogram load rating, Newton suction-force figure or tested speed rating is currently published for this mount, so this page does not invent those specifications.
What should I check before every trip? +
Check that both mounting surfaces and cups are clean, both vacuum locks are fully engaged, all adjustment knobs are tight, the Mini is secure and the installation complies with the Starlink service and mounting rules that apply in your region.
How can I contact Teskay?
How can I contact Teskay?
- You can contact Teskay directly via the chat bubble in the bottom-right corner.
- You can also reach our customer support team by emailing kay@teskay.com.
We will respond to your message within 24 hours.
Is it safe to make a payment on Teskay?
Is it safe to make a payment on Teskay?
Yes, absolutely. Paying on Teskay is safe and secure.
We use Shopify Payments, Shopify’s official payment system, to help ensure that every transaction is protected throughout the checkout process.
Bank-level security
Your payment information is encrypted and processed securely. We do not see or store your full card details.
Fraud protection
Shopify Payments uses advanced fraud detection and risk analysis tools to help prevent unauthorized transactions.
3D Secure verification
For some transactions, your bank may require additional verification to confirm that only the authorized cardholder can complete the payment.
Encrypted checkout
All payment data is protected with industry-standard encryption during the entire checkout process.
Trusted payment networks
Payments are processed through trusted global card networks such as Visa, Mastercard, and American Express.
In short, your payment on Teskay is handled through a secure and trusted payment infrastructure used by millions of customers worldwide, so you can shop with confidence.
Shipping Policy
Shipping Policy
📦 Processing Time
Orders are usually processed within 48 business hours after payment confirmation.
Please note that processing times may be slightly longer during weekends, holidays, or peak periods.
Some Tesla-related tools or accessories may include labels or stickers inside the package for identification or packaging purposes.
🚚 Shipping & Delivery
We offer free worldwide shipping on orders over $99 USD.
Please note that certain remote areas, such as islands or locations with limited carrier access (including Puerto Rico), may require an additional shipping fee. If this applies to your order, our customer service team will contact you before shipment.
Estimated delivery time for most standard orders: 7–13 business days (excluding order processing time).
For custom-made items, such as wheels or steering wheels, shipping times may vary. The estimated shipping time will be confirmed separately by our customer service team.
📌 Important Notes
Please make sure your shipping address and phone number are accurate and complete at checkout.
Teskay is not responsible for delivery issues caused by incorrect or incomplete shipping information provided by the customer.
Additional charges may apply for remote or hard-to-reach areas.
💬 Need Help?
If you have any questions about shipping or delivery, please feel free to contact our customer support team at kay@teskay.com. We are always happy to help.
Thank you for choosing Teskay ❤️
Refund Policy
Refund Policy
At Teskay LLC, we want you to enjoy a worry-free shopping experience. If you are not satisfied with your purchase, we are here to help.
🔄 30-Day Return Policy
You may request a return within 30 days of receiving your order.
Please contact us within this period to start the return process.
📦 Return Reasons & Fees
- Defective, Damaged, or Incorrect Items
If the item you received is defective, damaged, or incorrect, we can offer you a full refund or a replacement.
All related costs will be covered by Teskay. - Non-Quality Returns
For returns due to personal reasons, such as change of mind, style preference, color preference, or ordering the wrong item, a 20% restocking fee will apply.
Return shipping costs are the responsibility of the customer.
📝 How to Start a Return
Please contact us at kay@teskay.com or through our live chat first.
Once your return request is approved, we will provide you with the return instructions.
Please do not send the item back without prior authorization, as unauthorized returns will not be accepted.
🚫 Non-Returnable Items
The following items cannot be returned unless there is a quality issue:
Customized products, such as steering wheels and rims
Gift cards
Hazardous materials or flammable items
If you are unsure whether your item is eligible for return, please contact us before making a purchase.
💰 Refunds & Exchanges
Once we receive and inspect your returned item, approved refunds will be issued to your original payment method within 1–3 business days.
Please note that the time it takes for the refund to appear in your account may vary depending on your bank or card issuer.
If you would like to exchange an item, we recommend returning the original item first and then placing a new order.
💬 Need Help?
Your satisfaction is important to us. If you have any questions, please feel free to contact us at kay@teskay.com. We are always happy to help.
Thank you for choosing Teskay ❤️
How to view the installation video?
How to view the installation video?
Questions & Answers loading...
You may also like
Free Shipping
Free worldwide shipping over $99
Secure Payment
100% secure payment processing
Easy Returns
30-day return policy on all items(Customized products excluded)
Service Excellence
Fast customer support response service